Use scissors, knife or die to cut Dynaliner to the desired size and shape before installation. Next, remove dust, grease, moisture, and other foreign matter from the application surface. When used under carpeting, no spray adhesive is needed. For other locations, spray adhesive on the application surface and on the back of the Dynaliner. The simplest application technique is to bend the Dynaliner slightly and attach it along its shortest edge. Press Dynaliner firmly into place.
<< back to top

Red denotes metric measurements

Appearance: 
Gray acoustic foam

Thickness: 
0.50" (12.7mm)

Mass: 
0.08 lb/ft² (0.39 kg/m²)

Density:
2.0 lb/ft³ (0.125 kg/m³)

Tensile Strength:
15 psi

Tear Strength:
1.9

Thermal Conductivity Random Incidence Acoustical Thermal Resistivity (R):
1.9 (hr-ft2-deg.F/BTU)

Sound Absorption Coefficients (Using Reverberation Room Method -ASTM C423-84a and E-795-83 - Mounting A): 

0.18 @ 125 Hz
0.22 @ 250 Hz
0.51 @ 500 Hz
1.00 @ 750 Hz 
1.19 @ 1 kHz
1.00 @ 1.5 kHz
1.00 @ 2 kHz
1.10 @ 3 kHz
1.20 @ 4 kHz

Federal Standard Tests:
Meets HF-1

Temperature Range (Resistance)
-40ºF to +225ºF (-40ºC to +107ºC)

Handling and Application: 
Store material at room temperature for best application

Storage Information: 
Number of sheets in stack: 200 maximum
Material must be stored horizontally in its wrapping
<< back to top